As of: October 2026. Publisher: AGRACOM GmbH, Kühbach (Bavaria).
Many tractors, combine harvesters and ISOBUS terminals have a camera input ex works. With the right adapter cable, the existing terminal displays the image from a camera with a standard 4-pin plug (GX12) – without an additional monitor in the cab. AGRACOM stocks around 60 adapter cables and ready-made camera sets for Fendt, John Deere, Claas, Case IH, New Holland, Steyr, Valtra, Massey Ferguson, Deutz-Fahr, Müller Elektronik, Amazone, CCI ISOBUS terminals, Trimble, Grimme and trucks from MAN, Scania and Mercedes-Benz. This page shows which solution fits which terminal.
The short answer
- Most factory terminals only process analogue camera signals (PAL/NTSC). The AGRACOM K-520 camera, for example, is a good fit: Full HD sensor with analogue PAL output.
- Exception: FendtONE with green digital ports. Only digital cameras such as the AGRACOM K-270 or the K-300-KI with person detection work there.
- Always check three things before you buy: terminal and model year, location and plug type of the camera port, analogue or digital signal. A photo of the connector sent via WhatsApp to +49 175 2471853 is all it takes, and we'll tell you what fits.
Compatibility table: camera on the factory terminal
For each terminal, the table lists the connector on the vehicle and the matching AGRACOM solution. “Adapter cable” means: you use your own camera with a 4-pin plug. “Camera set” means: camera and connection cable come together.
| Manufacturer / terminal | Camera port on the vehicle | Matching AGRACOM solution | Wichtig |
|---|---|---|---|
| Fendt Vario with ProfiPlus terminal (10.4 inch), SCR and S4 series | Back of the armrest, M12 5-pin | Fendt Vario adapter cable, long version, Fendt camera set (analogue), Fendt wireless camera set (analogue) | For cameras with a Cinch plug, there is a Cinch adapter cable. |
| Fendt newer series and FendtONE with analogue ports | Right-hand headliner, black analogue sockets | Fendt Vario adapter cable, Fendt wireless camera set (analogue) | Only for the black analogue ports, not for the green digital ones. |
| FendtONE with digital ports | Green digital 4-pin ports, on standard tractors in the headliner on the right, on narrow-track tractors in the footwell by the seat | Fendt One digital camera set (K-270), K-300-KI with KI person detection | No converter needed; up to 6 digital cameras depending on equipment. Power supply: PowerConnect 12V for tractors built before September 2025, PowerConnect POE only from September 2025. |
| FendtONE without a prepared analogue input | Connector panel (pre-stamped position), camera control unit behind the storage compartments | Retrofit kit channel 3 (straight plug) or channel 4 (angled plug) | Channel 4 with angled plug for installation without a kinked cable. |
| John Deere 6R with Generation 4 or G5 display | Camera socket on the right in the cab | Adapter cable for 1 camera or 2 cameras, John Deere 6R camera set, John Deere 6R wireless camera set | Power and video signal via one cable, no activation. |
| John Deere 7R | Factory reversing camera pre-installation behind the cab under the cover | John Deere 7R adapter cable | No intervention in the vehicle wiring. |
| John Deere G5 Plus display | AUX port, 26-pin | Adapter cable 1-channel or 4-channel | Analogue cameras only (PAL/NTSC), not 720p, 1080p or AHD. An AUX port must be present. |
| Claas CEBIS | Camera ports on the back of the monitor | Claas CEBIS adapter cable for up to 2 cameras | Check beforehand whether your CEBIS monitor has camera ports on the back. |
| Claas Arion | Camera port in the cab | John Deere 6R / Claas Arion adapter cable | Same plug as on the John Deere 6R. |
| Claas ProfiCam 3 | ProfiCam-Videoverteiler | Claas ProfiCam 3 adapter cable, ProfiCam 3 camera set, ProfiCam 3 wireless camera set | For extending the system or replacing a faulty original camera. |
| Claas ProfiCam 4 | 5-pin plug of the Claas wiring | Adapter cable 5-pin to 4-pin, ProfiCam 4 camera set, ProfiCam 4 wireless camera set | One camera per adapter cable. |
| Case IH AFS 700 Plus, New Holland IntelliView 12 PLUS, Steyr S-Tech 700 Plus | Mini-BNC on the terminal | Mini-BNC adapter cable | 1.5 m long, of which 1.2 m for routing along the armrest and seat. |
| New Holland IntelliView with BNC connector | BNC on the terminal | New Holland IntelliView adapter cable | Existing BNC camera on a new Mini-BNC terminal: BNC to Mini-BNC. |
| Valtra and Massey Ferguson (e.g. Datatronic) | 5-pin plug on the back of the terminal | Valtra / Massey Ferguson adapter cable, camera set, wireless camera set | Cable length 1 m. |
| Deutz-Fahr iMonitor 3 and Topcon terminals | Two 5-pin sockets on the back of the terminal | Deutz iMonitor 3 / Topcon adapter cable, Deutz iMonitor3 camera set, wireless camera set | On the existing Deutz monitor wiring harness: adapter 5-pin to 4-pin. |
| ISOBUS terminals CCI 800 and CCI 1200 (e.g. Kuhn, Krone, Lemken, Amazone, Rauch, Fliegl) | 12-pin connector on the back | CCI 800/1200 adapter cable, CCI 800-1200 camera set, wireless camera set | Standard video signal (PAL), not HD. |
| ISOBUS terminals CCI 50, CCI 100, CCI 200 | Camera input on the back | CCI 50/100/200 adapter cable | Can be used regardless of brand. |
| Müller Elektronik Touch 800 and 1200, Amazone AmaTron 4, Amazone Touch 1200 | 5-pin connector on the back | Adapter cable 5-pin to 4-pin | Existing 4-pin cameras can still be used. |
| Trimble GFX and XCN | Original Trimble wiring harness | Trimble GFX / XCN adapter cable | Only works if the original Trimble wiring harness is installed. |
| Grimme video system and Grimme SmartView | Video distributor or monitor; with SmartView, the digital camera switch | Grimme adapter cable, Grimme camera set, K-270-GE set for SmartView | SmartView is digital, which is what the digital K-270-GE is for. |
| MAN trucks (radio MMT2 351 from model year 10/2016, MMT3) and Scania | On-board monitor or radio system | MAN / Scania adapter cable | The radio automatically switches to the camera when reverse gear is engaged. |
| Mercedes-Benz trucks | Camera preparation type J9J | Mercedes-Benz truck adapter cable | Only for vehicles with camera preparation J9J. |
Keep using existing cameras from other manufacturers
If you switch from another system to AGRACOM or replace a single camera, you usually don't have to rip out the existing wiring. These adapter cables connect AGRACOM cameras and monitors to systems from other manufacturers, in both directions.
| Existing system | Stecker | Existing camera to AGRACOM monitor | AGRACOM camera to existing system |
|---|---|---|---|
| MOTEC, Brigade ELITE, Rosho | 4-pin Mini-DIN | AC-007, AC-014 | To monitor: AC-020; to camera cable: AC-006 |
| MOTEC or Brigade to Fendt ProfiPlus | 4-pin Mini-DIN | Adapter cable 4-pin Mini-DIN to Fendt Vario | |
| MOTEC or Fendt reversing camera | 5-Pin | Motec / Fendt reversing 5-pin to 4-pin | - |
| Claas ProfiCam 4, Müller Elektronik, Fliegl | 5-Pin | Claas/Müller/Fliegl to 4-pin; to Fendt terminal: 5-pin to Fendt 5-pin | Adapter cable 4-pin to 5-pin |
| Claas ProfiCam (original camera) | Claas-Stecker | Claas ProfiCam camera to 4-pin | 4-pin camera to Claas ProfiCam 3 |
| Mekra | 6-Pin | Mekra 6-pin to 4-pin | 4-pin to Mekra 6-pin |
| Kramp | 6-pin screw-on or 6-pin Mini-DIN | Kramp 6-pin to AGRACOM monitor; to Fendt ProfiPlus: Kramp-Fendt adapter cable | AGRACOM camera to Kramp system |
| CAMOS | 6-Pin | CAMOS to AGRACOM 4-pin | AGRACOM 4-pin to CAMOS |
| LUIS | GX12 5-pin | LUIS 5-pin to 4-pin | 4-pin to LUIS 5-pin |
| Orlaco, JCB Fastrac ICON and other DIN M16 systems | DIN M16 | M16 camera to 4-pin monitor | 4-pin camera to M16 system |
| Grimme (original camera) | 8-Pin | Grimme camera to AGRACOM monitor; to Fendt terminal: Grimme camera to Fendt | 4-pin camera to Grimme video system |
| ISOBUS cameras with AEF plug (e.g. Krone, John Deere) | AEF | AEF socket 1-channel, AEF socket 2-channel | - |
| Deutz camera from Dakota Micro (CabCam) | Round 5-pin | Dakota Micro CabCam to AGRACOM monitor | - |
Analogue, AHD or digital: what can your terminal handle?
The most common reason for a black screen is not the wrong plug, but the wrong signal.
- Analogue factory terminals (Fendt ProfiPlus, John Deere G5 Plus, CCI, Valtra/MF, Deutz and most others) expect a standard video signal (PAL or NTSC, also known as CVBS). HD and AHD cameras show no image on them. The AGRACOM K-520 has a Full HD sensor and outputs the image as analogue PAL. This gives you a sharp image while still fitting analogue terminals.
- HD camera on an analogue system: The AGRACOM signal converter HD-analogue converts the HD signal into an analogue signal.
- FendtONE with green ports and Grimme SmartView are digital. Only the digital AGRACOM cameras K-270, K-300-KI and K-270-GE work there.
- AGRACOM's own Profi monitors process PAL, NTSC, CVBS as well as AHD 720p and 1080p. Existing cameras can almost always be kept in use with them.
Four steps to the right solution
- Identify the terminal and model year. With FendtONE, the model year (before or from September 2025) determines the power supply for the digital camera.
- Find the camera port and take a photo of it. The location, colour and pin count of the plug almost always tell you which cable fits. Typical locations: armrest, headliner on the right, right-hand console, back of the terminal.
- Clarify the signal. Analogue terminal: analogue camera or K-520. Digital port: digital camera.
- Choose a camera with an adapter cable or a complete set. For the run between the camera and the cab, there are 4-pin extension cables in various lengths. For trailers and changing implements, a wireless camera set is usually easier than running a cable all the way into the cab.
Typical connection mistakes
- Analogue adapter cable on the green FendtONE port: The green sockets are digital. The analogue Fendt Vario adapter cable only fits the black ports.
- Wrong PowerConnect on FendtONE: PowerConnect POE only works on tractors from September 2025. PowerConnect 12V always works.
- HD or AHD camera on an analogue terminal: No image. Remedy: K-520 or signal converter HD-analogue.
- Trimble adapter without the original wiring harness: The adapter plugs into the Trimble wiring harness and does not work without it.
- John Deere G5 Plus without AUX port: The G5 Plus adapter cable requires the AUX port on the display.
- Cable routed the wrong way round: Instead of re-routing it, the GX12 plug to plug and GX12 socket to socket adapters solve the problem.
No camera input on the terminal?
In that case, a separate monitor is the simpler solution. AGRACOM offers AGRACOM Profi-HD Touch systems, AGRACOM Profi-KI systems with person detection (certified to GS-BAU-71 in 7 and 10 inch with the K-15HD camera and eligible for funding from SVLFG and BG BAU) as well as wireless camera systems. One camera on two monitors at the same time is possible with a Y-adapter, two cameras on one input with the AGRACOM DuoSwitch.
You'll find all adapter cables under All adapter cables, and all complete sets under Cameras for factory pre-installations.
Frequently asked questions
Can I connect a reversing camera to my tractor terminal?
Yes, if the terminal has a camera input. This is the case with Fendt ProfiPlus and FendtONE, John Deere 6R, 7R and G5 Plus, Claas CEBIS and ProfiCam, Case IH AFS 700 Plus, New Holland IntelliView, Steyr S-Tech 700 Plus, Valtra, Massey Ferguson, Deutz iMonitor 3, CCI ISOBUS terminals, Müller Elektronik, Amazone AmaTron 4 and Trimble GFX/XCN. AGRACOM has matching adapter cables or ready-made camera sets for all of these terminals.
Do I need activation from my dealer?
With the AGRACOM sets for Fendt ProfiPlus, John Deere 6R, Deutz iMonitor 3 and CCI 800/1200, no additional activation is required. The camera is simply plugged in and selected in the terminal.
Will an HD camera work on my terminal?
On most factory terminals it won't, because they only process analogue signals (PAL/NTSC). Suitable options are analogue cameras such as the AGRACOM K-520 with Full HD sensor and PAL output, or an HD-to-analogue signal converter. The digital exception is FendtONE with green ports.
How many cameras can I display on the terminal?
That depends on the terminal. FendtONE displays up to 6 digital cameras depending on equipment, the Claas CEBIS adapter cable connects up to 2 cameras, and the John Deere G5 Plus adapter cable is available for 1 or 4 channels.
Can I keep using my cameras from MOTEC, Brigade, Mekra, Kramp, CAMOS, LUIS or Orlaco?
Yes. AGRACOM has adapter cables for these systems in both directions: existing camera to AGRACOM monitor or AGRACOM camera to existing system.
Beratung
Tell us the manufacturer, model and model year, ideally with a photo of the camera port. Phone +49 8251 8653780, WhatsApp +49 175 2471853, email info@agracom.de. If an adapter doesn't fit after all, we'll exchange it without any hassle. If you have any questions, just get in touch.
